| LENGTH: |
Up to 53' (longer lengths upon request) |
| WIDTH: |
96" or 102" standard |
| MAIN BEAM: |
High strength material. Ranges from 24" - 28" deep in center. |
| CROSS MEMBERS: |
4" high strength aluminum extrusion or 4" high strength steel. Crossmembers are available on 12", 14", 16" or 18" centers. |
| SIDES: |
6" high strength aluminum extrusion, 6" steel channel, 8.2 lbs./ft. The siderail is the winch track on both sides. |
| RUB RAIL: |
3/8" x 2 1/2" high strength aluminum extrusion or 3/8" x 2" steel. |
| STAKE POCKETS: |
Spaced 24" apart with pipe-spool. ID 1-5/8" x 3 7/16". |
| KING PIN: |
30" is standard. Other settings available |
| AXLES: |
22,500 lbs. rating for spring suspensions, 25,000 lb. rating for air ride suspension. |
| SUSPENSION: |
Air ride available in closed tandem or 10'1" spread. Spring suspension available in closed tandems. |
| LANDING LEG: |
Two speed. Ultimate load capacity 140,000 lbs. |
| FLOOR: |
1 1/4" extruded aluminum floor. 1-1/8" apitong floor or 1-1/2" treated Southern Yellow Pine floor. 5/16" zinc plated floor screws. |
| KNEE BRACES: |
Approximately every 4 feet supporting outside rail. |
| FINISH: |
All steel components have either undercoating or Imron paint. Mylar tape is placed between steel and aluminum components. Aluminum components have a natural finish. |
| LIGHTS: |
Protected wire harness. Sealed tail lights. Sealed marker lights. All connections are sealed. Rear lights enclosed in protective closures. |
| RUBBER BUMPERS: |
Heavy duty, located on outside corners. |
| MUDFLAPS: |
Both axles on 10'1" spread. Anti-sail type. |
